Project Description

The third generation of two stage cross partition
coal gasifier diameter 4300mm

Dry distillation section for refractory cross partition, dry ash discharge The advantages of this kind of furnace type: absorbs the advantages of the first generation and the third generation of furnace type, the wet ash discharge basin structure change to the structure the dry ash discharge without water seal bird-bath, due to remove the water seal, blast furnace bottom pres-sure is not res-tricted by water seal height (wet ash discharge of water seal hei-ght is 8000-10000 MM, so the blast furnace bottom pressure must not exceed 7000 pa.), Up to 10000 pa, so, more to improve gas production, can reach 7500-8000 m³ /h.
Combining the advantages of the third type furnace, carbonization effect is good, the period of the gas does not contain tar, purification equipment blocking phenomenon will not occur Disadvantages: due to dry ash discharge, gas stove to build on a layer of platform, increase
a layer of gas station, increased by about 3 meters high, increased investment in infrastructure.

Request a Quote

Main parameters and technical performance

Name

Value

Unit

Name

Value

Unit

Furnace Diameter Ф4300 imm Fuel Coal Bituminous coal,
GB9143-88
Cross
sectional
area
14.51 Granularity 13-25,25-50 mm
Water
jacket
Heating
area
44 Consumption 3880-4680 Kg/h
Working
pressure
0.05 Mpa Gas production 12000-14000 Nm³/h
Gas outlet diameter Ф 1100 imm Gas heating value 5.44-5.86 MJ/N M³
Air inlet diameter Ф630 mm Air seal steam
pressure
34.3 x 10⁴ Pa
Maximum blast
pressure
10000 Pa Saturation
temperature
50-65
Air requirement 2.8 Nm³/kg coal Water quality
requirement
of water
jacket and
air collecto
Suspended
matter
≤2 mg/L
Rotational speed
of ash tray
0.121-1.207 r/h Total
hardness
≤2.1 me/L
Coal feeding
system Motor
3.0 Kw PH value (25℃) ≥ 6.5-9.5
Transmission motor 18.5 Kw